Self-closing pivot door set 60PHP (hydraulic), brushed stainless steel
- Free shipment from € 500,- (incl. VAT)
- Pick-up in NL or delivery in NL and Flanders (exception of the Wadden Islands)
- Relatively short delivery times
- Pay with i.e. iDeal, Riverty, Billink, Bancontact, PayPal en Creditcard
This hydraulic hinge set for a double-acting pivot door is suitable for a glass door with a width of max. 1000 mm and can support a door of up to 100 kg. This set is from the brand "Ozone" and can be used in many situations because of its specifications and design. The big advantage of this hinge is the adjustment options and no spring system is needed in a built-in floor pot; the mechanism is built into the clamping part on the glass so that you can screw the pivots on the floor and on the top of the door opening. No large holes or recesses are needed in the floor and/or frame/door opening.
This complete set is sold with an upper shoe, lower shoe and pivot point. You will still have to order the handle and the glass. The mentioned price is therefore a set price for the hinge set.
Features Ozone 60PHP hydraulic hinge set (brushed stainless steel):
Hydraulic hinge set for double acting doors (doors that open both in and out)
The door can be swiveled 150 degrees inwards and 150 degrees outwards, with a rest position at 90 degrees in both directions
Center of pivot point at 60 mm (distance clear width to center of pivot point)
Material cover caps: brushed stainless steel (AISI316) (also available in matt black)
Cover caps are 190 x 70 mm (length x height)
Suitable for installation glass 8, 10, 12 mm
Glass deduction: bottom 11.5 mm, top 6 mm, side shoe side 7 mm, passage side 4 mm (tight opening dimensions minus the stated deduction per side)
Maximum door weight: 100 kg
Maximum door width: 1000 mm
Hinges are tested to 500,000 cycles!
To be ordered per set, the mentioned price is a set price!
This Ozone 60PHP hydraulic hinge set (brushed stainless steel) consists of:
One self-closing hydraulic shoe
Adjustable undercarriage
One upper shoe
Cover caps brushed stainless steel finish
Upper pivot point
Installation instructions can be downloaded
Points of attention:
Not suitable for single-acting doors (doors that only open in one direction)
Make sure that you use the correct glass deduction when ordering the glass door. Measure the opening properly with good and reliable measuring instruments, measure the width and height in several places and check whether the opening is 90 degrees square. Ask us for advice if you can't figure it out
The glass recess of the upper shoe is different from that of the lower shoe! Pay attention to this when ordering (state whether the hinges should be on the left or right, preferably with an additional drawing/sketch)
Read the installation manual carefully before starting installation! It contains useful installation tips
Take your time for the installation, don't rush! Work with the correct tools
Preferably use a long spirit level or a laser level for correct positioning of the door
NEVER let the glass door rest on the floor, always place something in between, such as a wooden slat, blanket, rug, etc. If glass is placed on a hard surface, the risk of damage is very high. This also applies to contact with the wall and other hard surfaces. Protect the glass, it is and remains a vulnerable product
Art. no. | 214901 |
---|---|
Brand | Ozone |
Suitable types of glass | installation glass (tempered glass incl. 5 holes and edge finishing), tempered-laminated glass |
Glass thickness in mm | 8, 10, 12, 8.38, 8.76, 9.52, 10.76, 11.52, 12.76 |
Style | square |
Material | Stainless Steel (AISI 316) |
Finishing | brushed stainless steel |
Expected delivery time | 1 - 3 working days |
Scope of supply | per 1 piece |
Unit of measurement | per set |
Packaging | box |
Warranty | 2 years |
Shipping price NL | 13,50 |
Shipping price BE | 17,50 |
Shipping price EU | see the check-out page for actual pricing |
Pick-up possible? | yes, Pick-up is possible in:, Oosterhout (Noord-Brabant), (always place orders on the website) |
Can my order of standard product(s) be delivered?
Yes, of course! We deliver standard products throughout the European Union (with the exception of products longer than 150 cm). In the Netherlands (with the exception of the Waddeneilanden) and the Dutch-speaking part of Belgium we can deliver length products up to a length of 6 meters. You should think of sealing profiles, U-profiles and mirror profiles. We have a limited stock ourselves, but we can still deliver many products relatively quickly because our reliable suppliers do have an extensive range in stock. In most cases they can ship this directly to your address.
If products are shipped from our own stock, we use Post NL. If Post NL does their job well, you should receive the package within 2 to 3 working days. We have no control over this ourselves and are really dependent on the performance of Post NL's employees. We can only ensure that the products are collected and brought to Post NL as soon as possible. We always send our packages with a track-and-trace option and share this track-and-trace code with our customer. This will keep you informed by post.nl about the progress of your package. We never send anything by postage stamp. Although this is a lot cheaper, you never know where your package is. We have had bad experiences in the past with postage stamps where envelopes were regularly not delivered. We therefore do not use this method of shipping.
If products are shipped directly from a supplier, they will ship it to you via another shipping company. Most companies will also share a track and trace with you from their carrier. When products are not in stock with us and/or our suppliers, they are ordered from the factory. It will be sent to you as soon as they are available. This results in a slightly longer delivery time. We try to state the current delivery time in the products as accurately as possible.
Where can the order for my standard product(s) be delivered?
We can have most standard products delivered throughout the European Union by Post NL. They work abroad with reliable carriers, so we can also send packages to in example Germany, France and Austria. However, we are limited in shipping products longer than 150 cm. As a result, we cannot send stabilizing bars, sealing profiles, U-profiles and mirror profiles abroad from our stock that are longer than 150 cm. With the exception of the whole of the Netherlands and the northern part of Belgium; here we can supply lengths up to 6 meters long.
Products that are sent directly from Bohle can be delivered in the Benelux, even if this concerns profiles that are longer than 150 cm. The rates of length transport from Bohle are quite expensive. The delivery costs that we pass on are the actual costs that Bohle also charges us.
In the products you can find under the tab "more information", where the product can be delivered and what the costs are.
Can I also pick up the order for standard product(s)?
That too is possible! On the payment page, choose the option that you would like to pick up the order. There are two pick-up options: The pick-up center in Oosterhout (near Breda) or at GlasBoertje.nl in 's-Hertogenbosch. These options are also stated on the payment page. As soon as we have an idea of the date that your order is ready for collection, we will inform you about this. We will also send you the address, opening times and additional information by e-mail.
Can I pick up all products at the collection locations?
Unfortunately, that doesn't always work. Some products are not in stock at all pick-up locations and must be special ordered or delivered to the location. It may then take a little longer before your order is ready.
There are also products that cannot be picked up in Oosterhout. These are products that are not in the range of the company in Oosterhout. In that case, one or more pick-up locations on the payment page may not be available, so that you can only choose to deliver the goods or to collect them in 's-Hertogenbosch.
It is possible that you want to pick up several products at a location, of which one of the products may not be in stock at that location. In that case you can still choose that location, but we will have to order the item that is not available there and have it delivered there. In that case, we must pass on the shipping costs that our supplier has also charged us. Costs can then be charged on the payment page when you pick up an order. These costs are then mentioned at the pick-up locations.
Be aware! The pick-up locations are somewhat limited in opening hours. These are business locations that have normal office hours and some locations are closed on Friday afternoons at 4:00 PM. Keep this in mind if you choose to pick up. Picking up at GlasBoertje is of course also possible, then we are more flexible regarding times. The opening times may differ around and during the holidays! The opening times are stated on the payment page, under the pick-up options.
When you choose the pick-up option, it goes without saying that the risk of breakage and/or damage is also transferred upon collection. When picking up your order, check carefully whether it is complete and undamaged before you take it with you.