Glass clamp MOD4200, flat mounting, for laminated glass 44.2, matt black structure

Glass clamp for indoor use, Material: Zamak

(more information)
Art. no.
242916
€11.75
per piece
Delivery: 1 - 3 working days
  • Free shipment from € 500,- (incl. VAT)
  • Pick-up in NL or delivery in NL and Flanders (exception of the Wadden Islands)
  • Relatively short delivery times
  • Pay with i.e. iDeal, Riverty, Billink, Bancontact, PayPal en Creditcard

Glass clamp type MOD 4200, flat mount, for laminated glass 44.2 (matt black) is a Zamak glass clamp suitable for indoor use. This clamp is ideal for mounting laminated glass panels between posts. It is delivered with a locking plate as standard. This plate is located inside the clamp and can be easily removed to create an open clamp. The locking plate supports the glass panel to prevent it from sliding out of the clamp.

Optionally, you can order a safety pin. This pin can only be used if a pre-drilled hole in the glass has been accounted for during the glass ordering process.

No additional cutouts in the glass are required for this glass clamp. As a result, there is a gap of approximately 20 mm between the glass and the post. If you are looking for a clamp for a shower wall, we recommend ordering a dedicated shower wall clamp instead of this one.

 

Features glass clamp MOD 4200, flat mount, for laminated glass 44.2 (matt black structure):

  • Glass clamp for mounting laminated glass or tempered-laminated glass
  • Mounting on a flat surface
  • Suitable for laminated glass 44.2 (thickness of 8.76 mm)
  • Designed for indoor use
  • Made of Zamak, powder-coated in RAL9005 matt black structure
  • Includes a removable locking plate, enabling an open bottom configuration
  • Glass deduction: 20 mm on each side where the clamp is placed
  • Dimensions: 45 x 28 x 57 mm
  • Available per unit; the stated price is a unit price!

 

Glass clamp type MOD 4200, flat mount, for laminated glass 44.2 (matt black structure) comes with:

  • One glass clamp
  • Two hex screws for securing the clamp to the glass
  • One removable locking plate
  • One gasket set for mounting laminated glass 44.2 (2 separate gaskets)

 

Points of attention:

  • Only laminated glass 44.2 will fit. Other thicknesses of glass will not fit with the delivered gaskets
  • Use the correct screws for your situation (these are not supplied with the clamp) screw
  • Open the clamp, mount the clamp on the upright / wall, position the glass in the correct place and clamp it with the Allen screws (use the correct thickness mounting gasket)
  • A safety pin can be ordered optionally. This requires a pre-drilled hole in the glass, which must be specified when ordering the glass. The required hole diameter is detailed in the product "safety pin"
  • Work carefully and use the proper tools
  • Preferably use a long spirit level or a laser level for precise positioning of the clamps
  • Ensure you apply the correct glass deduction when ordering the glass panel. Contact us for advice if needed
  • Make sure that when ordering the glass you indicate whether you are going to use the securing pin. You cannot drill into the glass afterwards
  • Never rest glass directly on the floor. Always place a protective layer, such as a wooden strip, blanket, or carpet, underneath. Placing glass on a hard surface increases the risk of damage. The same applies to contact with walls or other hard surfaces. Protect the glass, as it remains a fragile product
  • You are fully responsible for selecting the correct materials to meet the required standards. This applies to both the glass (i.e. thickness, size and specifications) and the mounting materials
more information
Art. no. 242916
Brand Q-Railing
Mounting of ... glass wall to normal wall (non-glas wall)
Degrees 90 °
Clamp for glass thickness 44.2 (8.76 mm)
Suitable types of glass laminated glass, tempered-laminated glass
Glass thickness in mm 8.76
Style square
Material Zamak
Finishing black structure
Expected delivery time 1 - 3 working days
Scope of supply per 1 piece
Unit of measurement per piece
Packaging box
Warranty 2 years
Shipping price NL 13,50
Shipping price BE 17,50
Shipping price EU see the check-out page for actual pricing
Pick-up possible? yes, Pick-up is possible in:, Oosterhout (Noord-Brabant), 's-Hertogenbosch, (always place orders on the website)
No questions

Can my order of standard product(s) be delivered?

Yes, of course! We deliver standard products throughout the European Union (with the exception of products longer than 150 cm). In the Netherlands (with the exception of the Waddeneilanden) and the Dutch-speaking part of Belgium we can deliver length products up to a length of 6 meters. You should think of sealing profiles, U-profiles and mirror profiles. We have a limited stock ourselves, but we can still deliver many products relatively quickly because our reliable suppliers do have an extensive range in stock. In most cases they can ship this directly to your address.

If products are shipped from our own stock, we use Post NL. If Post NL does their job well, you should receive the package within 2 to 3 working days. We have no control over this ourselves and are really dependent on the performance of Post NL's employees. We can only ensure that the products are collected and brought to Post NL as soon as possible. We always send our packages with a track-and-trace option and share this track-and-trace code with our customer. This will keep you informed by post.nl about the progress of your package. We never send anything by postage stamp. Although this is a lot cheaper, you never know where your package is. We have had bad experiences in the past with postage stamps where envelopes were regularly not delivered. We therefore do not use this method of shipping.

If products are shipped directly from a supplier, they will ship it to you via another shipping company. Most companies will also share a track and trace with you from their carrier. When products are not in stock with us and/or our suppliers, they are ordered from the factory. It will be sent to you as soon as they are available. This results in a slightly longer delivery time. We try to state the current delivery time in the products as accurately as possible.

 

Where can the order for my standard product(s) be delivered?

We can have most standard products delivered throughout the European Union by Post NL. They work abroad with reliable carriers, so we can also send packages to in example Germany, France and Austria. However, we are limited in shipping products longer than 150 cm. As a result, we cannot send stabilizing bars, sealing profiles, U-profiles and mirror profiles abroad from our stock that are longer than 150 cm. With the exception of the whole of the Netherlands and the northern part of Belgium; here we can supply lengths up to 6 meters long.

Products that are sent directly from Bohle can be delivered in the Benelux, even if this concerns profiles that are longer than 150 cm. The rates of length transport from Bohle are quite expensive. The delivery costs that we pass on are the actual costs that Bohle also charges us.

In the products you can find under the tab "more information", where the product can be delivered and what the costs are.

 

Can I also pick up the order for standard product(s)?

That too is possible! On the payment page, choose the option that you would like to pick up the order. There are two pick-up options: The pick-up center in Oosterhout (near Breda) or at GlasBoertje.nl in 's-Hertogenbosch. These options are also stated on the payment page. As soon as we have an idea of ​​the date that your order is ready for collection, we will inform you about this. We will also send you the address, opening times and additional information by e-mail.

 

Can I pick up all products at the collection locations?

Unfortunately, that doesn't always work. Some products are not in stock at all pick-up locations and must be special ordered or delivered to the location. It may then take a little longer before your order is ready.
There are also products that cannot be picked up in Oosterhout. These are products that are not in the range of the company in Oosterhout. In that case, one or more pick-up locations on the payment page may not be available, so that you can only choose to deliver the goods or to collect them in 's-Hertogenbosch.

It is possible that you want to pick up several products at a location, of which one of the products may not be in stock at that location. In that case you can still choose that location, but we will have to order the item that is not available there and have it delivered there. In that case, we must pass on the shipping costs that our supplier has also charged us. Costs can then be charged on the payment page when you pick up an order. These costs are then mentioned at the pick-up locations.

Be aware! The pick-up locations are somewhat limited in opening hours. These are business locations that have normal office hours and some locations are closed on Friday afternoons at 4:00 PM. Keep this in mind if you choose to pick up. Picking up at GlasBoertje is of course also possible, then we are more flexible regarding times. The opening times may differ around and during the holidays! The opening times are stated on the payment page, under the pick-up options.

When you choose the pick-up option, it goes without saying that the risk of breakage and/or damage is also transferred upon collection. When picking up your order, check carefully whether it is complete and undamaged before you take it with you.