Mirror mounting set E04 (blind assembly)
Maximum capacity 6 kg. This is equal to a 6 mm thick mirror with a maximum of 0.4 m2
(more information)- Buy 6 for €7.52 per set each and save 6%
- Buy 12 for €7.20 per set each and save 10%
- Free shipment from € 500,- (incl. VAT)
- Pick-up in NL or delivery in NL and Flanders (exception of the Wadden Islands)
- Relatively short delivery times
- Pay with i.e. iDeal, Riverty, Billink, Bancontact, PayPal en Creditcard
With this blind mirror mounting set E04 you can mount a mirror up to 6 kg on the wall without seeing the mounting materials. The space between the wall and the mirror is 17 mm (1.7 cm) so that the mirror appears to float on the wall. This gives your mirror a more luxurious appearance and you create a spatial effect.
Even if your wall is not completely flat then this set is extremely suitable. You only need 1 hanging point on the wall and 2 spacer blocks. In other words, there are only 3 places where the mirror touches the wall. You will not be bothered by further irregularities.
Features of the E04 mirror mounting kit:
- Suitable for invisible mounting of a mirror
- Maximum carrying weight 6 kg, or a 6 mm thick mirror of max. 0.4 m2
- Extremely suitable for damp rooms such as a bathroom
- Easy to adjust level when mounting due to the white eccentric mounting plate
- The mirror hangs 1.7 cm free from the wall
- The mirror can be easily moved or removed later
- Only 1 drill hole needed in the wall
This blind mirror mounting system type E04 comes with:
- One eccentric disk with adjustment option (mounting with 1 screw on the wall)
- One self-adhesive plate 100 x 100 mm with suspension eye (mounted on the rear of the mirror, on top)
- Two self-adhesive foam spacers (mounted on the rear of the mirror, on the bottom, so that the mirror on the bottom has the same distance to the wall as the top. Without these spacers, the mirror hangs diagonally forward)
- One plug and one screw
- Assembly instructions
Points of attention:
- When mounting, place the mirror on a firm, flat and soft surface (for example, place a blanket on a sturdy table)
- Degrease the back of the mirror before you stick the adhesive plate on it
- Measure well where the plate should go, if it is stuck you will not get it loose
- Stick the self-adhesive plate on the back of the mirror. Place approx. 15 kg of weight on the self-adhesive plate and let it sit for at least one hour (so that the plate can adhere well to the rear of the mirror)
- The corners, edges and rear of the mirror are vulnerable. Always place the mirror on a soft surface such as a piece of carpet or rug. Don't bump into anything and never let the mirror lean on a corner
- When you want to add a mirrorheating we advise you to choose set EM08, EM16 or EM24
- When mounting a mirrorheating, the self-adhesive plates must not be in contact with the heating element
- This mounting set is NOT suitable for mirrors with a safety film on the back
- This set is suitable for the mirror types (without safety film) supplied by GlasBoertje.nl. We cannot guarantee proper adhesion of this set on mirrors that are not supplied by us